JUKI SMT | Surface Mount Technology (SMT)
From: Author:JUKI SMT Publish time:2019-07-23 16:11 Clicks:0
What is Surface Mount Technology
ETA providing SMT solutions including pick and place machine, reflow oven, SMT stencil printer, SMT line and wave soldering machine.
JUKI SMT surface mount technology JUKI SMT machine, multi-function pick and place machine, JUKI SMT pick and place machine, JUKI SMT chip mounter, JUKI SMT mounter, JUKI SMT placement, is one of the important parts of SMT.
Surface-mount technology (SMT) is a method for producing electronic circuits in which the components are mounted or placed directly onto the surface of printed circuit boards ( PCBs ). An electronic device so made is called a surface-mount device (SMD). In industry, it has largely replaced the through-hole technology construction method of fitting components with wire leads into holes in the circuit board. Both technologies can be used on the same board, with the through-hole technology used for components not suitable for surface mounting such as large transformers and heat-sinked power semiconductors.
By employing SMT, the production process speeds up, but the risk of defects also increases due to component miniaturization and to the denser packing of boards. In those conditions, detection of failures has become critical for any SMT manufacturing process.
An SMT component is usually smaller than its through-hole counterpart because it has either smaller leads or no leads at all. It may have short pins or leads of various styles, flat contacts, a matrix of solder balls (BGAs), or terminations on the body of the component.
❙ JUKI SMT Chip Mounter Video