Knowledge about NXT track amplifier
This picture is the FUJI NXT second-generation equipment track exit entrance amplifier diagram (some of the NXT first-generation models have the old "Samtake" type, which...Show DetailsAn example of simple repair of NXT head
This head was once replaced on the device, and the calibration was successfully completed, but the placement is all points offset, and the offset is large. Re-calibration...Show DetailsThoughts caused by shock-absorbing pads
The institutions in the picture below must have seen all colleagues who have used FUJI NXT.
Show DetailsNXT error code "8000D701"
Starting today, a series of copywriting related to FUJI NXT error codes will be launched one after another, but it will not involve some deeper electrical circuit knowled...Show DetailsJUKI KE2080 Pick and Place Machine
JUKI KE2080 Pick and Place Machine Mounting Speed: 20,200CPH PCB size:510 x 360 mm Component range:0402 (01005) component size:0402 ~ 33.5mm Product description: JUKI KE2...Show DetailsJUKI FX-3RA Pick and Place Machine
JUKI FX-3RA Pick and Place Machine Component Size: 0402 / up to 33.5 × 33.5 mm Placement Rate: up to 90,000 CPH Feeder Spaces: up to 240 Max. PCB Size (Standard) (mm) 330...Show Details