JUKI SMT Machine JUKI Pick and Place Machine
From: Author: Publish time:2019-05-28 17:31 Clicks:0
JUKI SMT Machine JUKI Pick and Place Machine
ETA company as JUKI pick and place machine and Hanwha pick and place machine provider many years.
Now ETA was authorized by Japan JUKI headquarters as solo sales of Saudi Arabia, Algeria market. Other markets we do as before. The main market is Europe and America and South American countries.
ETA is the agent of JUKI pick and place machine, JUKI smt machine, JUKI chip shooter, JUKI chip mounte, JUKI Placement.ETA provides the best solutions and equipment with JUKI SMT.
ETA provide SMT DIP full line solution, to provide customers with convenient one-stop service. Which help clients save more money and more time.
This JUKI smt machine with high speed 42000CPH, wide component rang,optimum line balance and highest throughput. New head design automatically adjusts the centering height based on components placed. JUKI's laser centering technology is fast, accurate and reliable for a wide range of parts.
1.No head replacement, newly developed "Parallel 8 nozzle head" with auto-height component recognition sensor
Automatically adjust the component recognition sensor of the mounter head from 1 to 25 mm in 5 stages according to the PCB requirements. High productivity is achieved without replacing the placement head, even for parts with different heights, from very small parts to large parts.
2.High placement capacity of 42,000 CPH
The distance between the pick and placement positions is shortened by adopting the new RF series electric feeder. Additional improvement is achieved by optimization of the component pickup / mounting operation. This results in a class leading maximum tact time of 40,000CPH (under optimum conditions).
3.Extensive component compatibility
Components from 0.2 mm × 0.1 mm to 74 mm square, 50 mm × 150 mm, and the height of parts up to 25 mm can be mounted. Component range and placement speed have been improved by changing the image recognition to four-part simultaneous recognition and using high-speed motors on the θ (theta) axis of the nozzle. In addition, we adopted a new electric feeder that is smaller, lighter, and thinner. The feeder capacity has been increased to 112 per RS-1 to improve capability of a single machine solution.
4.Implementation of smart mounting process
Components from 0.2 mm × 0.1 mm to 74 mm square, 50 mm × 150 mm, and the height of parts up to 25 mm can be mounted. Component range and placement speed have been improved by changing the image recognition to four-part simultaneous recognition and using high-speed motors on the θ (theta) axis of the nozzle. In addition, we adopted a new electric feeder that is smaller, lighter, and thinner. The feeder capacity has been increased to 112 per RS-1 to improve capability of a single machine solution.
We also have other JUKI smt machine pick and place machine JUKI JM-20, JUKI KE-2060, JUKI JX-350, JUKI KE-2050, JUKI JX-100, JUKI KE-2070, JUKI JX-200, JUKI KE-2080, JUKI KE-3010A, JUKI KE-3020VA, JUKI FX-3R, JUKI FX-3RA, JUKI RX-6R, JUKI RX-6B, JUKI JX-300LED.
❙ JUKI Pick and Place Machine Video