Content
JUKI High-Speed Compact Modular Mounter RS-7
Innovative Production Efficiency
Improvement for the Whole Factory
Features:
• Linking to other machines for improved productivity
• Graphical system visualization
• JaNets Integraton
• New P16S head with improved accuracy
• Simultaneous production of PCBs
• Top and Bottom Check of Leaded Parts
• Low impact placement force
• High speed of maximum cluster tact 75,000 CPH
• Compact Design – 998mm width
• Wide Component Range
High -Speed Compact Modular Mounter RX-7R | ||||
(P16S×P16S head) | (P16S×P8*1 head) | (P8×P8*1 head) | ||
Board size |
Single lane conveyer | 50×50~510mm*2*3×450mm | ||
Single lane conveyer Single lane mode |
50×50~510mm*2*3×450mm | |||
Single lane conveyer Dual lane mode |
50×50~510mm*2*3×250mm | |||
Component height | 3mm | 3mm(P16S head) | 10.5mm | |
10.5mm(P8 head) | ||||
Component size | 03015*4~□5mm |
03015*4~□5mm (P16Sノ head) |
0603~□25mm | |
0603~□25mm (P8 head) |
||||
Placement speed (Optimum) |
Chip | 75,000 CPH | 54,900 CPH | 34,800 CPH |
IC | - | 6,400 CPH*3 | 12,800 CPH | |
Placement accuracy |
Chip | ±0.04mm(Cpk≧1) | ||
IC | - | ±0.04mm | ||
Feeder capacity | Up to 56*6 | |||
Power supply | 3 phase AC200V、220V-430V*7 | |||
2.3kVA | ||||
Operating air pressure | 0.5±0.05MPa | |||
Air consumption (standard) | 20L/分ANR(during normal operation) | |||
Machine dimensions (W x D x H)*9 | 998×1,895×1,530mm | 998×1,895×1,530mm*8 | ||
Mass (approximately) | about 1,820kg*10 |
*1 Contact sales for more details
*2 The BOC, BAD mark, and 2D code can be recognized when the board size X-axis is between 50 mm and 350 mm.
*3 In long board mode.(Two PCBs up to 420mm can be produced simultaneously)
*4 Contact sales for details
*5 Using P8 head
*6 Using RF04AS or RF08AS feeders
*7 Optional transformer required for 220V - 430V
*8 P8 head requires 123mm additional space on the front for the feeder bank
*9 Display and signal light not included
*10 Using P16S x P16S head configuration, dual lane with trolleys