Name:High-Speed Compact Modular Mounter RX-7
Model:High-Speed Compact Modular Mounter RX-7
Brief:High-Speed Compact Modular Mounter RX-7,Placement speed ( Optimum) Chip : 75,000CPH*1
■
Component size : 03015*2~25mm x 25mm
■
P16 nozzle head that realizes high-speed high-density placement of very small components
■
P8 nozzle head that realizes high-speed and high-accuracy placement of middle and small general-purpose components
■
Space-saving design with a width of 998 mm
■
This is applicable to the dual lane production.
Content
High-Speed Compact Modular Mounter RX-7
■ |
|
Placement speed ( Optimum) Chip : 75,000CPH*1 |
|
■ |
|
Component size : 03015*2~25mm x 25mm |
|
■ |
|
P16 nozzle head that realizes high-speed high-density placement of very small components |
|
■ |
|
P8 nozzle head that realizes high-speed and high-accuracy placement of middle and small general-purpose components |
|
■ |
|
Space-saving design with a width of 998 mm |
|
■ |
|
This is applicable to the dual lane production. |
|
■ |
|
An optimum production line can be configured for each production item through a combination of heads. |
|
■ |
|
High productivity based on an original planet head and a structure of parallel two heads |
|
■ |
|
This is applicable to small-size IC components ranging from 03015 chip*2 to 25 mm square to be placed. |
*1 When using P16 nozzle head.
*2 Please contact to us for detail. |
|
|
|
|
High-Speed Compact Modular Mounter RX-7
|
P16×P16
nozzle head |
P16×P8
nozzle head |
P8×P8
nozzle head |
Board size |
Single lane conveyer |
50×50~510mm*1 x 450mm
|
Dual lane conveyer |
50×50~510mm*1 x 250mm
|
Component height |
3mm
|
3mm
(P16 nozzle head)
|
10.5mm
|
10.5mm
(P8 nozzle head)
|
Component size
|
03015*2~5mm x 5mm
|
03015*2~
5mm x 5mm
(P16 nozzle head)
|
0603~
25mm x 25mm
|
0603~
25mm x 25mm
(P8 nozzle head)
|
Placement speed (Optimum) chip
|
CHIP |
75,000CPH
|
54,900 CPH
|
34,800 CPH
|
IC |
-
|
6,400 CPH*3
|
12,800 CPH
|
Placement accuracy
|
CHIP |
±0.04mm(Cpk≧1)
|
IC |
-
|
±0.04mm
|
Component loading quantity
|
38 (76 in case of 8mm tape) *4
|
|
|
*1 When using a long size PWB mode.
*2 Please contact to us for detail.
*3 This is applicable only to the P8 nozzle head.
*4 When a double lane feeder is used |